namespace YLErp.Modules.SwapModule.Accrual;

/// <summary>
/// 计息过程追踪收集器（值对象，非日志）。2026-08 自 Core 层（YLErp.Core.Interest）迁入 DAL，
/// 与 Simple/CompoundInterestAccrual、AccrualBoundary 同处一域，Core 不再持有计息类型。
///
/// <para><b>为什么是收集器而不是日志调用</b>：计息数学（Simple/CompoundInterestAccrual）必须保持纯函数、
/// 可单测、不依赖 NLog；但按工程铁律，关键路径日志须<b>无条件常驻落盘</b>（出问题时事后翻日志定位，不能依赖开关）。
/// 折中：纯函数把"发生了什么"记录为结构化条目写入本收集器，由<b>适配器(IO 边界)</b>统一经
/// <c>SwapCalcTrace.Write</c> 常驻落盘。落盘职责归一处，计息代码零日志依赖、保持干净。</para>
///
/// <para><b>可 diff</b>：<see cref="ToString"/> 产出稳定、有序、与 SwapCalcTrace.Day 对齐的逐行文本，
/// 新旧引擎对同一笔交易跑出的 trace 可直接 diff，定位"是计算变了还是重构引入了漂移"。</para>
///
/// <para>所有记录方法均为语义化命名（Day / ResetBefore / Rollover …），调用点一眼即懂，不污染数学可读性。</para>
/// </summary>
public sealed class AccrualTrace
{
    private readonly List<AccrualTraceEntry> _entries = new();

    /// <summary>已记录的追踪条目（只读）。</summary>
    public IReadOnlyList<AccrualTraceEntry> Entries => _entries;

    /// <summary>计息区间起点：标记本次计算的整体边界与年化口径。</summary>
    public void MarkStart(DateTime start, DateTime end, AccrualBoundary boundary, int annualDays, bool annualized)
        => Add(AccrualTraceEvent.Start, start,
            $"START 区间[{start:yyyy-MM-dd},{end:yyyy-MM-dd}] {boundary} annualDays={annualDays} annualized={annualized}");

    /// <summary>逐日明细：当日生效利率、计息基数、当日利息、累计利息。这是"为何 accrued N 天而非 M 天"的直接证据。</summary>
    public void Day(int idx, DateTime date, decimal rate, decimal basePrincipal, decimal dayInterest, decimal accumulated)
        => Add(AccrualTraceEvent.DayAccrual, date,
            $"  [{idx}] {date:yyyy-MM-dd} rate={rate:P6} base={basePrincipal:F4} day={dayInterest:F6} acc={accumulated:F6}");

    /// <summary>分段明细（多日计息，按重置日分段）：段区间[segStart,segEnd)、天数、生效利率、计息基数、段利息、累计利息。
    /// 这是分段模型与旧逐日循环对账的核心证据——每段的"前后日期/基数/利率"一目了然。</summary>
    public void Segment(int idx, DateTime segStart, DateTime segEnd, int days, decimal rate, decimal basis, decimal segInterest, decimal accumulated)
        => Add(AccrualTraceEvent.DayAccrual, segStart,
            $"  [seg{idx}] [{segStart:yyyy-MM-dd},{segEnd:yyyy-MM-dd}) days={days} rate={rate:P6} basis={basis:F4} segInterest={segInterest:F6} acc={accumulated:F6}");

    /// <summary>EOD 上下文：计息日、重置日标志、平仓比例、基数各分量。供日终单日计息定位"重置日分支选对了吗"。</summary>
    public void EodContext(DateTime eodDate, bool isResetDay, decimal unwindFraction, decimal priorAccrued, decimal priorNotional, decimal notional, decimal remainingFraction)
        => Add(AccrualTraceEvent.Start, eodDate,
            $"  CTX {eodDate:yyyy-MM-dd} reset={isResetDay} unwind={unwindFraction:P2} priorAccrued={priorAccrued:F4} priorNotional={priorNotional:F4} notional={notional:F4} remainingFrac={remainingFraction:P4}");

    /// <summary>重置日<b>前</b>：生效利率(旧)与计息本金(滚动前)。利率/本金切换的"因"。</summary>
    public void ResetBefore(DateTime resetDate, decimal rateOld, decimal principalBefore)
        => Add(AccrualTraceEvent.ResetBefore, resetDate,
            $"  RESET↓ {resetDate:yyyy-MM-dd} rate(old)={rateOld:P6} principal(before)={principalBefore:F4}");

    /// <summary>重置日<b>后</b>：生效利率(新)与计息本金(滚动后，已并本金)。利率/本金切换的"果"。</summary>
    public void ResetAfter(DateTime resetDate, decimal rateNew, decimal principalAfter)
        => Add(AccrualTraceEvent.ResetAfter, resetDate,
            $"  RESET↑ {resetDate:yyyy-MM-dd} rate(new)={rateNew:P6} principal(after)={principalAfter:F4}");

    /// <summary>本金增加（利息滚入计息基数）：复利段末并本金的瞬间，记录滚入额与并本金后的新基数。</summary>
    public void Rollover(DateTime resetDate, decimal accruedRolled, decimal newBasis)
        => Add(AccrualTraceEvent.Rollover, resetDate,
            $"  ROLLOVER {resetDate:yyyy-MM-dd} accrued(rolled)={accruedRolled:F6} newBasis={newBasis:F4}");

    /// <summary>平仓缩放：平仓比例、累计已实现、剩余未实现。</summary>
    public void Unwind(DateTime date, decimal unwindPercent, decimal realized, decimal remainingUnrealized)
        => Add(AccrualTraceEvent.Unwind, date,
            $"  UNWIND {date:yyyy-MM-dd} pct={unwindPercent:P2} realized={realized:F6} remaining={remainingUnrealized:F6}");

    /// <summary>收尾：最终累计利息与当日利息。</summary>
    public void MarkEnd(decimal totalAccrued, decimal totalToday)
        => Add(AccrualTraceEvent.End, default,
            $"END accrued={totalAccrued:F6} today={totalToday:F6}");

    private void Add(AccrualTraceEvent step, DateTime date, string line)
        => _entries.Add(new AccrualTraceEntry(step, date, line));

    /// <summary>稳定可 diff 的逐行文本（与 SwapCalcTrace.Day 格式对齐）。</summary>
    public override string ToString()
        => _entries.Count == 0 ? "<empty trace>" : string.Join(Environment.NewLine, _entries.Select(e => e.Line));
}

/// <summary>追踪条目的语义类别（对应 QuantLib/Strata 的"事件"概念），便于程序化筛选（如"只看重置日"）。</summary>
public enum AccrualTraceEvent
{
    Start, DayAccrual, ResetBefore, ResetAfter, Rollover, Unwind, End
}

/// <summary>单条追踪记录：类别 + 日期 + 已渲染文本。</summary>
public readonly record struct AccrualTraceEntry(AccrualTraceEvent Step, DateTime Date, string Line);